840
edits
Changes
→Goggle Basics
Back to [[Airsoft Information]]
== Goggle Basics ==ASTM is working on a new goggle standard for airsoft which should be published between in 2014 based on the current progress. The committee working on it has a few items to review and some comments that require addressing to complete the development process. Mike Lukas, technical specialist on the F08.27 committee, recommends the following guidelines:# '''Non Play Conditions''' - target range or weapons testing## Non-sealed eye chamber safety glasses or goggles ## Meeting US MIL-DTL-43511D, ANSI Z87.1-2003 (high impact)## European equivalent is EN166 with a medium or high impact rating# '''Any Tactical Conditions''' - any person on any playing field ## Sealed eye chamber safety glasses or goggles## Meeting US MIL-DTL-43511D, ANSI Z87.1-2003 (high impact)## European equivalent is EN166 (Medium Impact)## The sealed eye chamber should be of a design not to allow a BB to enter through any ventilation ports in the goggle frame that are around or access the eye chamber## Watch for goggles that have foam barriers glued to the outer part of the goggle to cover ventilation opening - avoid goggles with openings under the foam large enough to allow the entry of an airsoft BB # '''Joint Paintball and Airsoft Fields''' ## Paintball Goggles meeting ASTM F1776-12## Generally recommended by operators of both paintball and airsoft activities## Removal of the face protection is considered safe as long as no large openings exist after this is done to the goggle system# '''Periodic Checks''' - All units should be checked by the end user prior to use each day and preferably before each game for:## Cracking of the frame or lens - should be no longer used if this is evident## Strap or other retention device to fit to the head - goggles must fit securely and provide a full seal around the eye area when worn## Gaps or openings - any opening or gap between the lens and frame or face and protector that will allow the entry of a 6 mm BB will make the unit unsafe## Scratching or marks on the lens surface - this is discretionary as this reduces the field of view of the goggle. If the lens is all scratched up or marked the chance of a player removing them on the field is higher. Encourage replacement.## Any modification or additions to the goggle should be reviewed to ensure they do not allow entry of a 6 mm BB to the eye compartment. Reading Mike's recommendations seems to indicate that ballistic goggles with full seal to the face are favoured -- but we'll see!
Paintball-approved eye protection only-- face (tooth) protection recommended-- at paintball facilities (North Vancouver, Richmond Indoor). Only goggles that provide a sealed space between the outside environment and your eyes protect your eyes from paintballs and BB's. Ballistic goggles or paintball-approved eye protection at all airsoft facilities (Panther, Bigfoot).