- Posts: 850
- Joined: 2013-02-03 / 09:02 UTC GMT +00:00
2014-12-29 / 23:04 UTC GMT +00:00
So just gamed my latest project for the first time yesterday.
WE G39 HPA....HIGH cap mag.
After a few hundred rounds of test firing and modifying a ran the G39, at 80 PSI on the regulator I was tossing .20s at 390fps.
out of the box even with HPA FPS was a little inconsistent and under hop and over hop was an issue.
after a new Hop rubber, complete cleaning with minimal lubing, some mods to the hop adjuster dial and shimming the barrel nut to fix a wobble, I was getting good FPS consistency and the hop effect was much better.
other mods included, reducing recoil and bolt travel with extended buffers, also stiffer recoil spring.
This mod made for less recoil and twice the speed of follow up shots as bolt travel was reduced by about 25%, also aided in FPS stability.
for the game a settled on 90 PSI using .32 BBs (with .20 shooting 430fps) I was happy with results but still room for improvement! I am going to try and reduce pressure but re valve the nozzle to make up for FPS loss and not waist so much pressure to drive the bolt back.
my other Mod was to the MAG, I attached a AEG Hi-cap Mag to the stock Gas Mag for 470 rounds of enjoyment, also after drilling and tapping the Gas mag for a HPA QD fitting I epoxied the Mag where possible leaks could happen, the Mag can still be fully functional to use with propane if I wish too.
hitting the green chair at the end of Panthers test firing range is will with in its range.
stay tuned I will report back on further Mods and testing.
The WE G39 is a beast of a gun, kicks harder than any Real steel 5.56 that I have ever shot and has a good feel to it.
WE G39 HPA....HIGH cap mag.
After a few hundred rounds of test firing and modifying a ran the G39, at 80 PSI on the regulator I was tossing .20s at 390fps.
out of the box even with HPA FPS was a little inconsistent and under hop and over hop was an issue.
after a new Hop rubber, complete cleaning with minimal lubing, some mods to the hop adjuster dial and shimming the barrel nut to fix a wobble, I was getting good FPS consistency and the hop effect was much better.
other mods included, reducing recoil and bolt travel with extended buffers, also stiffer recoil spring.
This mod made for less recoil and twice the speed of follow up shots as bolt travel was reduced by about 25%, also aided in FPS stability.
for the game a settled on 90 PSI using .32 BBs (with .20 shooting 430fps) I was happy with results but still room for improvement! I am going to try and reduce pressure but re valve the nozzle to make up for FPS loss and not waist so much pressure to drive the bolt back.
my other Mod was to the MAG, I attached a AEG Hi-cap Mag to the stock Gas Mag for 470 rounds of enjoyment, also after drilling and tapping the Gas mag for a HPA QD fitting I epoxied the Mag where possible leaks could happen, the Mag can still be fully functional to use with propane if I wish too.
hitting the green chair at the end of Panthers test firing range is will with in its range.
stay tuned I will report back on further Mods and testing.
The WE G39 is a beast of a gun, kicks harder than any Real steel 5.56 that I have ever shot and has a good feel to it.
you went FULL RETARD!!