Page 1 of 2

Quality VS Quantity

PostPosted: 2014-03-06 / 16:21 UTC GMT +00:00
by Gunny
Pretty simple straight forward question for you guys.

AEG Quality? Or AEG Quantity?

I have been asked on many different occasions. "Hey gunny why do you only have 2 AEG's" my answer is, how many guns can you bring on to the field?

"But what if one of your guns goes down while playing"
That has happened to me once in the last 3 years of gaming, and if it does I have one extra AEG backup.

I have a buddy of mine that is very proud of himself for owning 8-10 AEG's of various low to mid end brands. I prefer to start off with a higher end brand AEG and tune/upgrade it for performance and reliability.

In my airsoft career I have acquired quite a few different airsoft guns/pistols to play many different roles
CQB
Assault
DMR
Sniper
GBBR awesomeness
(no SAW though :( )


So what do you think?

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 17:28 UTC GMT +00:00
by DrunkenTeddy
For Rifles I have to justify the need to myself, I have 1 DMR, 2 400ish fps guns (one as a backup), a cqb gun, plus my GBBR. I justify having 5 rifles as having different guns for different needs. I very much like quality, most of my guns are mid-high quality, with the exception of my backup m4 which is some sort of Frankenstein gun.

For a while I was buying and selling guns on Craigslist and at one point I had more than 10 rifles, but most were not very good quality and couldn't be relied upon, after seeing how unreliable a low end gun can be I'm not likely to go back to using or even buying/selling low end guns.

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 18:48 UTC GMT +00:00
by damageMTF
Quality.

I upgrade my guns only using premium aftermarket parts. I want my guns built like a tank. I do not like my guns failing on me during game days. Kept 6 out of 25 in my airsoft gun collection. 3 Aeg's, 1 TW, Bolt action rifle and a pistol.

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 18:58 UTC GMT +00:00
by Pinoy
Since I've passed the airsoft OBSESSENESSS stage :roll: now I can say "quality" although my "quantity" is still beyond the reasonable amount ;)

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 19:00 UTC GMT +00:00
by Ricochet
Quality in all things; guns, gear, equipment, accessories, etc.

I'd rather have one outstanding performer that may break down eventually, and make me miss a few games than an armory. That being said, having a reliable spare is a good idea. Once I have all the stuff I "need", including a quality primary, I'd start saving for or building a backup.

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 20:32 UTC GMT +00:00
by bushman
The way i see it quality is a word that is very vague for airsoft guns and gear. I could buy a quality VFC gun that, with a tight bore, is a gun that could last several years with just a new spring once a year. $600.00
A Systema is a quality gun that should last longer, and the spring is about the same, depending on how much use for both.$2000.00
I believe quality is based on the individual and what he can afford.
I consider my KA Thompson a quality gun even though it has a plastic lower. I paid $150.00 Damn good quality for that price.
I would still rather buy 3 guns for the price of 1 Systema. They are still quality guns.
Not to mention the fact that if you really like airsoft you must really like guns and to say there is only 1 you like with all the different ones out there is like saying there is only 1 good car out there.
Comes down to taste and preference.

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 21:24 UTC GMT +00:00
by Meatshower
I'm basically in the exact same boat as Gunny with this topic. I have my VFC SR15 as my primary, and my VFC SCAR-L as my back up. That's all I need. Especially someone like me where my job dictates how often I can come down and play. This is just my opinion, but I'd rather buy a top-end AEG and get it running like a champion with some after-market parts and some fine tuning. Of course this is no over night process. To figure out how to get your gun running perfectly for you can take months really. From figuring out what needs to be done, to purchasing the parts, to giving it to a gun doc or installing it yourself (depending on the part and complexity of installation). But in my view, I'd rather have 2 fine tuned AEGs that are running like Ferraris then a bunch of mid end guns that, besides their externals, aren't really that special.

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 23:23 UTC GMT +00:00
by badlandsmike
Quality over quantity any day of the week. However, price tag =/= quality. I own 4 Primary rifles now, but each one is built for a different application.

The CM Raiders that I sell are by no means a "Ferrari", but they're absolute tanks. I have yet to see one fail for any reason other than an uneducated user attempting adjustments or modifications on their own. That gun for under $200 is a textbook example of quality to me.

Re: Quality VS Quantity

PostPosted: 2014-03-06 / 23:49 UTC GMT +00:00
by Jherico
I agree with everyone who has said Quality I much rather spend let's say the $600 I spent on my fist M4 2 years ago, then say $200 on a low rung M4, although a $200 M4 today is much better than a $200 M4 2 years ago, for example if you look at the G&G they have their main line as well as the Max series you get a "top" of the line out of the box ready to go weapon that only requires a few additions like some kind of optic, maybe a fore grip and spare mags. Basically I think most Airsoft company's now see that a player will spend more on their primary at start up then have to do constant upgrades after they hit the field and there beaming smile is turned to a frown once they see what others are using.

But only being in the sport for 2 years I could be completely wrong.

Re: Quality VS Quantity

PostPosted: 2014-03-07 / 00:35 UTC GMT +00:00
by SLIM
Quality!!

I have only ever owned 1 AEG since I started back in 05 :) Although I have not been around much over the last couple of years because of other commitments I know I can still grab it at a moments notice and it's good to go!

My 2 tips would be:
1. Start off with something decent
2. Get yourself a good gunplumber!